Filament Dryer or Dry Box? Choose the Job You Need Done
Decide whether your filament needs active drying, protected storage or both, and understand what a dry-box humidity reading can tell you.
3D printing guides
Check spool fit
How to Measure a Filament Spool for a Dryer
Measure a filament spool’s outside diameter and overall width, account for hubs and adapters, and compare your measurements with a dryer’s spool limits.
Buying a Modular Filament Dryer: Check the Whole Kit
Check the box, powered dock, adapter, power supply and storage closures before buying a modular filament dryer or adding another container.
Latest guides
Browse all guides
Silica Gel in a Filament Dry Box: Replace or Recharge?
Decide when dry-box silica gel needs replacement or regeneration. Check indicator instructions, settled humidity, seals and product-specific heating limits.
Brim vs Mouse Ears: Choosing Where a Print Needs Grip
Compare a full brim with local mouse ears for lifting corners. Inspect OrcaSlicer previews, tune the contact gap and account for edge cleanup.
How to Untangle Filament Without Losing the Free End
Find a filament crossover, loosen it with the free end under control, rewind loose turns and secure the tip before checking the feeding path.
PETG Stuck to PEI? A Careful Print-Removal Guide
Remove a stubborn PETG print from PEI with controlled cooling and permitted sheet flexing. Recognize surface damage and prepare the next print correctly.
AMS Spool Compatibility: Size Checks by Model
Check spool width, outer diameter and hub size for original AMS, AMS 2 Pro and AMS lite, then assess adapters and material feeding separately.
PLA Not Sticking to PEI? Read the First Layer
Diagnose PLA adhesion on PEI from first-layer lines, plate seating and failure location. Make one controlled adjustment before restarting a long print.